加工误差对压气机叶栅气动性能的影响

目的 研究不同区域加工误差对叶片气动性能的影响。方法 选用轴流压气机出口级静叶叶中截面,以叶型厚度变化和中弧线变化为特征,分别在叶型前缘、最大厚度和尾缘区域添加加工误差,采用数值模拟方法,对比设计叶型气动性能,研究叶型各区域几何偏差对性能的影响。结果 叶型前缘几何偏差对气动性能的影响最大,偏差造成的中弧线偏移对性能变化起主导作用。尾缘区域几何偏差对性能的影响趋势与前缘区域完全相反。考虑叶型整体偏差时,轮廓度正偏差造成的性能恶化更加显著。结论 所得的几何偏差影响规律可为实际叶片加工过程中工艺的制定和超差审理提供数据支持。     

涂料制造行业挥发性有机物排放成分谱及影响

采用不锈钢采样罐对华东地区8家涂料制造企业生产车间排口进行采集,运用气相色谱-质谱联用技术（GC-MS）测定了106种VOCs组分,识别了VOCs排放特征,建立了溶剂型涂料和水性涂料VOCs排放成分谱,分析了VOCs对臭氧生成的贡献.结果表明,涂料制造行业VOCs特征组分主要为芳香烃和含氧烃,两者浓度范围在65.5%~99.9%,溶剂型涂料VOCs排放主要以芳香烃为主,占总VOCs的63.0%~94.0%;水性涂料VOCs排放主要以含氧烃为主,占总VOCs的54.5%~99.9%.间/对-二甲苯（32.4%）、乙苯（19.0%）和乙酸乙酯（12.1%）为溶剂型涂料源排放特征,乙酸乙酯（83.7%）与2-丁酮（8.0%）为水性涂料源排放特征.芳香烃和含氧烃是涂料制造行业的主要活性组分,对臭氧生成潜势（OFP）的总贡献率在92.9%~99.9%之间.源反应活性分析（SR）表明,水性涂料单位质量VOCs对臭氧的生成贡献低于溶剂型涂料,因此可显著降低臭氧的生成潜势.研究显示,针对涂料制造行业VOCs污染治理,应重点关注芳香烃和含氧烃中对臭氧生成潜势贡献较大的VOCs组分,进行源头和精细化控制.     

气浮-水解-好氧工艺处理制药废水

利用气浮-水解-好氧工艺处理制药废水。运行结果表明,该工艺处理效率高,操作简单,处理后排放废水符合国家污水综合排放标准(GB9878 1996 )。     

加压上流式好氧污泥床(PUASB)法处理制药废水初探

在进水ＣＯＤ为５００－６００ｍｇ／Ｌ、压力ｐ＝０．２ＭＰａ、回／流比Ｒ＝６条件下,加压上流式好氧泥泥床平均ＣＯＤ去除率为７１％,出水基本达到国家排放标准;进水ＣＯＤ为１０００ｍｇ／Ｌ以上,在ｐ＝０．３ＭＰａ、Ｒ＝６条件下,ＣＯＤ去除率仍可达到７０％左右。     

应用复合生物技术处理制药综合废水的探讨

采用改进型UNITANK和BAF工艺对东北制药总厂综合废水进行了试验研究 ,阐述了主要工艺原理 ,CODCr的去除效率可达到 90 %以上。对于高浓度废水可以使出水CODCr≤ 5 0 0mg L。整个废水处理系统具有运行稳定、处理效果好和处理成本低的特点 ,为工程建设提供了有力的依据和保障。     

用氟化钾水溶液从制药废液中回收吡啶

研究了普通精馏与加盐分相技术在回收吡啶中的应用。测定了吡啶 水 氟化钾体系在25℃时的液液相平衡数据,采用Pitzer理论和UNIQUAC方程对相平衡数据进行了理论计算,结果表明计算值与实验值符合良好。采用氟化钾水溶液回收吡啶,当60%氟化钾浓溶液与50%吡啶/50%水的物料的质量比为2.0时,有机相中吡啶的纯度可达到92.60%(质量分数),水相中氟化钾稀溶液经蒸发回收后循环使用不影响分离性能。该工艺的开发成功为制药行业从制药废液中回收吡啶开辟了一条新途径。     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

生态保护补偿政策能否促进企业高质量发展——来自黄河流域制造业的经验证据

黄河流域环境污染与高质量发展已成为当前国内关注的重要问题,我国为应对黄河流域生态恶化带来的挑战制定了一系列环保政策。本文立足生态补偿政策并构建准自然实验,以 2005-2019年黄河流域 A股制造业上市公司为研究对象,运用多期双重差分法实证检验生态保护补偿政策对黄河流域制造业高质量发展的影响。研究发现:生态保护补偿政策的实施促进了黄河流域制造业高质量发展水平的提高且存在明显的区域异质性和产权异质性,具体表现在对黄河流域上游和国有企业制造业高质量发展促进作用明显高于中下游地区和非国有企业。社会责任承担和政府补助增加是生态保护补偿政策推进黄河流域制造业高质量发展的重要方式,上述研究结论在经过 PSM-DID、更换被解释变量、安慰剂检验后仍然具有稳健性。研究全面考虑了生态保护补偿政策在流域内不同区域发挥作用的渠道,有利于充分发挥生态保护补偿政策在黄河流域生态治理和高质量发展中的功效。     

Opportunities for redistributed manufacturing and digital intelligence as enablers of a circular economy

The linear production of consumer goods is characterised by mass manufacture by multinational enterprises and globally dispersed supply chains. The current centralised model has created a distance between the manufacturer and end user, limiting the opportunity for intelligent circular approaches for production and consumption. Through a mixed method approach, opportunities of circularity are explored for the consumer goods sector. The study presents four lenses to analyse three enterprises through a multi-case study approach to explore the potential of digital intelligence and redistributed manufacturing (RDM) as enablers of circular business models. In addition, the study examines whether Discrete Event Simulation can be used to evaluate the circular scenarios identified through quantifying flows of material that determine traditional economic value (cost/tonne). The mixed method approach demonstrates that, a qualitative systemic analysis can reveal opportunities for circularity, gained through implementing ‘digital intelligence’ and distributed models of production and consumption. Furthermore, simulations can provide a quantified evaluation on the effects of introducing circular activities across a supply chain.     

江苏省沿江开发区空间分工、制造业集聚与转移

基于新经济地理学相关理论，针对江苏省沿江开发战略实施以后，制造业空间可能存在的变动，在整理和分析调查问卷资料的基础上，选择专业化指数和基尼系数2种方法来定量分析江苏省21个沿江省级以上开发区空间分工、制造业集聚和转移态势。结果表明：（1）2002~2006年江南沿江开发区通过向江北沿江开发区转移部分传统产业，逐渐形成了江南沿江技术/资本密集型制造业“中心”和江北沿江劳动密集型制造业“外围”的空间分工格局；（2）江南沿江开发区内部、江北沿江开发区内部尚未形成良好的分工关系；（3）受开发区发展阶段、区域产业政策、本地化资源供给和市场需求等因素影响，并未发现理论预期的普遍存在的产业集聚现象，仅纺织服装、石化、电力、塑料橡胶等产业呈现集中趋势.